cooling surface
英 [ˈkuːlɪŋ ˈsɜːfɪs]
美 [ˈkuːlɪŋ ˈsɜːrfɪs]
网络 冷却受热面; 冷却面; 冷却表面
双语例句
- Thus the wind can aid appreciably in cooling the surface layers of the ocean.
这样一来，风能够明显地有助于冷却海洋的表面层。 - Performance Analysis on Cooling Liquid of Surface Mine Heavy Loading Engine
露天矿重载车辆发动机冷却液性能分析 - If the amount of cooling at the surface exactly equals the heat delivered by the point source, a self-sustaining toroidal convection cell will be created.
如果在表面变冷失去的热量恰好等于由局部源带来的热量，就将会产生一个环形对流圈。 - Formed through radiative cooling, the surface fog layer was followed by a cloud layer caused by lowlevel cold advection.
结果表明，此次雾过程首先由地面辐射冷却形成贴地雾层，而后因低空平流冷却形成低云。 - According to the theory of indirect evaporative cooler, heat can be taken away through water evaporation by wrapping water absorbent film on the cooling surface of air conditioner condenser.
应用间接蒸发散热的原理，在空调冷凝器表面包覆吸水膜，利用水蒸发带走热量。 - Meanwhile, monsoon and the cooling of sea surface play a very important role in generating these differences.
同时，季风和海面冷却在产生东海黑潮锋的区域性差异中亦起着重要的作用。 - Three additional sensitive experiments are carried out to investigate the effect of condensation latent heating, evaporation cooling and surface heat flux.
进行三组敏感性试验，研究凝结潜热释放，蒸发冷却与地表热通量对气旋结构与强度的影响。 - However, if there are only bubbles or spherical nuclei, but no suitable stickiness, pressure, under cooling, surface energy and adsorption in the iron melt, it is still very difficult for the nuclei growing into the spherical graphite.
但是，铁水中如果只有气泡或球形核心存在，而没有足够的粘度、压力、过冷度和较高的表面能以及吸附等其它充分条件的配合，这些核心仍然很难长大成为球状石墨。 - Objective To compare the protective effects of mild hypothermia induced by extracorporeal blood shunt cooling or surface cooling on brain after resuscitation from cardiac arrest.
目的评估和比较体外血液冷却和体表降温形成亚低温对兔心肺复苏后的脑保护作用。 - Dimensional equations attained from the study of condensation usually aim at revolving or tabulating cooling surface. The error is large.
冷凝方面的以往研究所得到的一些实验关联式，一般针对冷却面为回转面或平板表面，误差较大，其结果很难直接应用于锌精馏冷凝设备。 - Bio-Heat Model with Cooling of Surface Evaporation Radiated High Power Millimeter-Wave
高功率毫米波辐照的表面蒸发失热效应生物传热模型 - The heat-transfer process of condensers mainly exists on the side of steam, however, the condensing heat transfer on the side of steam is the forced-convection one of steam-gas mixture which relates to the non-condensing gas, whose flow and heat-transfer performance severely vary along the cooling surface.
由于凝汽器的传热过程主要汽阻产生于汽侧，而汽侧的凝结换热为含有不凝结气体的汽气混合物的强迫对流换热，其流动与传热特性沿着冷却表面剧烈变化。 - The results showed that using the simple directional solidification process the obtained carbides in the high Cr cast iron are oriented along the longitudinal direction. The shape, distribution and average spacing of carbides are different with different distance from the cooling surface.
结果表明：本实验中所采用的简易定向凝固工艺能够实现高铬铸铁碳化物的定向排列，且与激冷面距离不同处，碳化物形态、分布和平均间距不同； - Effects of film cooling on surface pressure distribution on turbine blades
气膜冷却对涡轮叶片表面压力分布的影响 - With this system, the runner gate system design, mold cooling analysis, surface modeling, and automatic drawing could all be well carried out on microcomputer.
此系统主要解决了四个难点：浇注系统设计、冷却系统分析、型腔、型芯的曲面造型设计、装配图和零件工作图的设计绘制。 - The results of recrystallization of polycrystalline Si on SiO_2 by both CW Ar laser and CO_2 laser irradiation are compared. Different effects of radial cooling along specimen surface and vertical cooling through into the substrate during the recrystallization are analysed.
本文比较了连续Ar离子激光器和CO2激光器辐照下多晶硅在SiO2上的再结晶，分析了纵向散热和横向散热对再结晶的不同作用。 - The paper briefs the developmental status of three kinds of air cooling system i.e.: direct air cooling system, surface type condenser-indirect air cooling system and mixed type condenser-indirect air cooling system ( Heller system).
介绍了3种空气冷却系统：即直接空冷系统（GEA）、表面式凝汽器的间接空冷系统、混合式凝汽器的间接空冷系统（海勒系统）的发展现状。 - Theoretically, that the volume of cold water in the aquifers for cold energy storage is enough to supply cold energy to cooling working surface in the whole course of refrigeration.
从理论上证明了，储冷层冷水体在井下制冷设备运行过程中，可为井下工作面降温提供充足的冷量。 - To point out the requirements of water cooling, surface treatment, lubricant and wire rods while drawing the high-carbon wire.
提出高碳钢丝拉拔时对水冷、表面处理、润滑剂及盘条要求。 - The one-dimensional transpiration cooling system with surface ablation is a control system of variable-domain distributed parameter.
一维有烧蚀的发汗冷却系统是一个可变域上的分布参数控制系统，本文将其转化为固定域上的定解问题。 - Testing and Research on Operation Performance of Indirect Dry Cooling System with Surface Condenser
表面式凝汽器间接空冷系统运行性能试验研究 - It investigates experimentally mixed convection and heat transfer augmentation by forced jets in a large rectangular enclosure with a vertical cooling surface.
实验研究了在具有垂直冷却面的大型矩形腔体中因强迫射流造成的混合对流传热。 - It shows that reasonable use of artificial roughness on the cooling surface of the mould can enhance the cooling of the mould and increase productivity.
计算和分析表明：在热成形模具外冷却表面合理地设置人为粗糙度有利于强化对模具的冷却，提高生产效率。 - Because of laser's transient heating and fast cooling on metal surface, laser cladding ceramic reinforced composite layer on titanium alloy surface can greatly improve wear resistance of titanium alloy.
利用高能激光束对材料表面瞬间加热和熔池快速冷却的特性，在钛合金表面用激光熔覆一层陶瓷增强复合材料，能够显著提高钛合金的耐磨性能。 - Optimum Options for Cooling Surface of Condenser s Calculation of the Divided Area of Surface Condenser
凝汽器冷却面积的优化选择表面式凝汽器的分区计算 - Fogging and filming of high humidity gas flow under effect of cooling surface
冷却表面影响高湿气流局部凝雾及成膜现象 - Cooling type, surface pressure, relative rotating speed and braking torque all are important factors in the selection of friction materials.
冷却方式、表面压力、相对转速和制动扭矩是选择摩擦材料时需要考虑的重要因素。 - Based on experiments and calculation an investigation has been conducted on the influence of the major technological factors of indirect chills on the cooling surface enlargement coefficient of chills.
通过浇注实验和数值计算的方法研究了铸钢件在采用间接外冷铁时，主要工艺因素对冷铁冷却面积扩大系数的综合作用。 - Then combined with calculated heat transfer coefficient and partition technique on the cooling surface, direct problem program was used to obtain the transient characteristic of the whole plate.
进而，利用正问题程序结合反演的对流换热系数以及钢板表面的分区技术，获得钢板内部所有位置的温度瞬变特性。 - Due to the strengthened oceanic stratification, cooling in the surface layer triggers significant warming in the subsurface layer.
由于海洋层结加强，在上层海洋变冷的同时，次表层海洋发生了显著的增暖。